Measurement Technology has introduced the EL 6.0 Electronic Register for use in diverse retrofit or OEM applications.

It features some of the most advanced features not available in other electronic registers. Automatic calibration of the register, so it will work with any meter currently on the market that has an output shaft or quadrature pulse outputs; any size of meter from 1\2" to 8" or larger. There is no need to run any preset amounts to calibrate as long as you have a known amount.

The display is customizable for multiple arrangements to suit the application whether it be retail, commercial or bulk.

Integrated backlight on the displays, and LCD display modules rated for the harshest of climates. (-55 C to 55 C) or (-67 F to 131 F) The displays utilize a design that works with or without ambient light so they are visible with or without the backlight.

Most components are plug and play, they can be swapped without removing power to them. All components that are accessible from the outside are intrinsically safe so they can be swapped into any design, pump or dispenser without costly modifications.

Originally designed for replacement of mechanical registers, the Eliminator 6.0 is not limited to any set amount on the price per unit display) (there is no limit of $2.00 per gallon for example). It can display in any unit of measure without any modification or optional accessories. All customer programming and daily operations, including changes to pricing and reading daily totals can be done with an infrared remote control which will work at up to 30 feet.
 
 

All features are prompted by "user friendly" on-screen displays. All on-screen prompts are in english, without cryptic numbers.

Functions can be accessed by each user on a password basis. There are passwords for each of the different functions. The following features are accessed by password:

Price Change
Reading Totalizers
General programming
Audited programming
The audit features in programming are sealable so any metrological data meets Weights and Measures requirements .
 
 

• Accurate (3 decimal resolution on volume display))
• Works with any Meter
• Backlit Displays
• Works in any currency
• Works with any volume units
• Intrinsically safe
• Remote programming

• Easily serviced
• Automatic Temperature Compensation built in.
• No price limits
• Controls motors and solenoids
• Preset capability
• P.O.S. Capability
• Remote pulser ready
• Programmable volume resolution
• No battery required for totals or configuration
• Automatic calibration, no gears or mechanical adjustments.
• Can interface to card readers or Touch screen terminals for unmanned site operation

 

 

The Eliminator 6.0 has only three electronic boards, meaning less serviceability problems, and fewer parts to stock. All setup configurations are standard. There is no need to change chips for different features. What does this means to you? The same register has the functionality to work in a retail dispenser, a commercial dispenser, or on bulk rack applications. Displays can be programmed to show price for retail, no price for commercial, and compensated and gross volumes for bulk applications. The Eliminator 6.0 can also be used in propane applications.
 
 

Input Voltage:
110/220 Vac, 50-60Hz, .2/.1A

Motor Control Output:
12 A@220 Volts side A,3/4Hp
12 A@220 Volts side B,3/4Hp

Solenoid A,B fast and slow:
2A, 220 Vac

Handle Switch A,B:
5A, 220 Vac
 
 

Measurement Technology International Is a member of the Mid-West Group of Companies. Specializing in the design and manufacture of measurement devices for liquid fuel applications. All of our products are customizable to meet our clients needs. Many applications outside the petroleum industry.